Category: SOLD: 1968 Camaro

Window frame tubing and tabs have been finished and installed

The window frames for the Camaro are bent to shape, and the window tabs welded up. The window templates have been made, now time to cut some Lexan. The Lexan has been attached to window framing then bolted up to

Tagged with: , , ,

Getting the 68 Camaro ready for the drag strip

Finishing up the 555

This drag racing Camaro project is wrapping up quickly. The boys in the garage are finishing up final wiring and making templates for the Lexan windows. Addition of 5 lb. fire bottle and 3 Nozzles is always a good choice.

Drag racing parachute and wing plus new Plymouth coupe flooring

The ’68 Camaro And Metal Fabrication This Stroud Pro Stock parachute just fits under the new wing we made for the 68 Camaro. We have been playing around with the side spill plate size and shape. The drag racing parachute bag

Tagged with: , ,

1968 Camaro Rolling Chassis

Built to run Sportsman Class or Bracket Racing, NHRA Certified 8.50. This is a new car. Mild steel, TIG welded, tube chassis, U.S. Body Source Fiberglass Body, Harwood trunk lid, rear bumper, and extended hood. F1 Hood Scoop from Suncoast Race Cars. Aluminum

Tagged with:

1968 Chevy Camaro Roller

The ’68 Camaro drag car recently received NHRA certification to 8.50.  We’ve been busy wiring and placing components. The firewall is getting close to being completed – lots of welding and grinding have gone into this one. We are just about ready

Tagged with: , ,

68 Camaro Chassis Fabrication

Before we placed the body back on we had to make and TIG weld the drivers floor. The center “X” under the floor and both left and right foot wells – all in steel. The passenger floor is aluminum and removable with Dzus fasteners.

Tagged with: , ,

Chassis Fabricators in Northeast Tennessee

Spring has sprung, the dogwoods are flowering and our winter project has come out of hibernation. The Camaro chassis has been modified and fixed, then fully assembled, tore down, and painted. Now a few touch ups and we are ready

Tagged with: , ,

1968 body off and chassis flipped

We flipped the car to finish the TIG welding on the underside of the chassis. Cleaning up the chassis and getting ready for paint. TIG weld firewall inserts.

Tagged with: , ,

We just finished these exhaust headers for the 68 Camaro

Custom Fabrication

These look like a candelabra! They will be attached to an All Aluminum 555 Big Block. Plus we fabricated this custom gauge cluster for the Camaro.

Tagged with: , , , ,

All Aluminum 555 Big Block Camaro

This Camaro BUILD had already been started when it came to us. Once we had it on the JIG table we decided the changes that were needed, and it’s been full speed ahead. Here are some snapshots of progress on

Tagged with:

High Performance Chassis Suspension And Rear End

pro mod race car builders

This Camaro is another project we have in the shop. We have been fitting the body and lining up the front fiberglass to the body. It’s all coming together. Chassis suspension; the photo below shows the upper wishbone has been

Tagged with: , , , , ,

New Drag Race Chassis On The Jig Table

This mild steel tube chassis project is TIG welded. With 1000 horsepower it will be a Super Gas / Bracket Car. It will absolutely make a showing at Bristol Dragway next season.

Tagged with: , , ,
Top