Category: Drag Race Cars

1933 Plymouth Chassis Engineering

drag car chassis fabrication

Today the skeleton of this 33 Coupe was unleashed. Before taking the car off the jig – we finished up the welds – and to do that we had to remove the body. As seen here we had to flip

Tagged with: ,

Corvette Certified NHRA to 8.50

pro street ready for the track

1992 Corvette Pro Street, removable hardtop, Molly round tube chassis just finished and NHRA certified to 8.50! 427 BBC, 2 1/4 custom made headers with mufflers, TH400 reverse manual valve body, trans brake, ATI fuel /blown converter, narrowed and braced

Tagged with: ,

We took the new 1972 chevy vega to Cherokee Raceway in Rogersville on Saturday for the first test.

iCanFab started this 1972 chevy vega project in May of this year. We stripped the entire car down to just a skin and re-built it. This vega weighs in at 2,463 lbs. Since our local racetrack Bristol Dragway is closed

Tagged with: , , ,

This video is from Friday night before the Super Chevy show

 The car had no high gear during our quick test. The boys will get that fixed on Monday – but for the show – it would mean no drag racing.  We’ll be testing again soon.

Tagged with:

We will be racing at Bristol’s Super Chevy Show this weekend.

This 72 Vega will be in the DOT (1/4 Mile) Sportsman Class at Bristol Here is an update on our status. Everything is coming together – but it’s crunch time – and we are awaiting final parts to arrive. I

Tagged with:

Chevelle SS – ready for the dragstrip

1964 Chevy Chevelle Malibu SS – Super Gas – NHRA Certified 8.50 BBC 468 cu.in., Turbo 400, full frame 2×3, strut front, dana rear (see photos under this car) mild steel cage and funny; just NHRA certified to 8.50, fiberglass

Tagged with: ,

The narrowed nine is ready

Another Vega component — off the list. Wildwood disc breaks, freshened the chunk, narrowed the rear, cleaned it up.

Tagged with:

This 2×3 full chassis car now has a 14-point roll cage with a front crossmember modification

This chassis goes beyond the basics. We had the room – so we added more down bars going to the right spots on the frame. Now on to sheet metal . . .

Tagged with: , , ,

The Vega back-halved

After a day of grinding, cutting and fitting – and today this Vega is back-halved. NEXT!

Tagged with:

1972 Vega Hot Rod Project

This Chevy Vega project comes to iCanFab from Virginia. The car was already tubbed out.  The engine that awaits this vehicle is a new JEGs 350 SBC. This will help keep this car affordable and able to run on pump

Tagged with: , ,

NMCA racing and Jim Oddys’ Dodge Stratus Pro Mod

During our race season with Jim Oddy and the Dodge Stratus – we achieved a top speed record in NMCA in Memphis. As a result of the good showing in Memphis, our race team announce their invitation to compete in

Tagged with: , ,

1963 Chevrolet Corvette Coupe – NHRA Top Sportsman Class

1963 Split window for sale

As part of the Davis Brothers Race team – this 1963 Chevrolet Corvette Coupe was serviced and maintained by iCANFAB. This race car was originally built by Suncoast Race Cars and Advanced Fiberglass Concepts located in Homosassa, FL. The Davis Brothers

Tagged with: ,

Send in the Muscle with this race motor

A Fresh 482 BBC NOS Race Motor

Tagged with: , ,
Top